Laptop Keyboard Laptop Keyboard Replacement

Published on January 20th, 2015 | by admin


How to Go about Laptop Keyboard Replacement 101

When going about keyboard replacement, it’s important to remember that laptop keyboard repair is no laughing matter and it shouldn’t be left in the hands of amateurs. In fact, to go about laptop keyboard failure is the least of your worries if the agent that caused its demise is a spilled drink, soup, or even a cleaning solution, because the liquid could seep right into the motherboard and internal circuitry of your laptop, rending in inoperable in every which way. Usually if you’re going about laptop keyboard replacement, a technician has or you yourself have probably diagnosed that the problem is the internal keyboard of your notebook computer, thus necessitating removal of the old keyboard in favor of a newer one. This can be tricky since no laptop is made alike.

The Trouble of Finding Replacements

Laptop Keyboard Replacement
There is no universal, one-size-fits-all laptop keyboard replacement because there are so many types of laptops around. Even if you have a MacBook, it’s still problematic since keyboards change in size and shape from one version of the Apple laptop to another as well. Therefore, your first order of business is to find the right laptop keyboard replacement in accordance to your laptop make and model. This is tough if your laptop is about five to ten years old, because you’re for sure out of luck in terms of fresh replacement parts. Some laptops go obsolete as soon as six months hit.

What this means is that it’s possible that the only replacement parts you can get for your “outdated” laptop is from secondhand stores and shops that still sell your specific model. This is always the problem with off-warranty laptops, so if you’re going to end up busting a keyboard, it might as well be when it’s still in warranty. Once you do find a laptop keyboard replacement, then it usually involves quick removal and insertion of the new keyboard—i.e., you’ll be removing the two screws on the bottom of the computer and hold down the keyboard bezel.

You’ll also need a guitar pick or credit card and a screwdriver when attempting to replace the keyboard on your own. If you’d rather not, a technician can do it for you, but you’ll have to pay him for it on top of the keyboard replacement you already paid for. After turning the unscrewed computer over, insert the credit card between the screen and the bezel, prying it up from pegs that sit on holes on the computer. After popping it open, there should be a ribbon attached to the keyboard’s underside and a plastic connector holding it together. Unplug that as well by pulling up on the two tabs.

Don’t do it rough, be as gentle as possible when handling these electronics. After the ribbon’s release, gently pull away the old, non-functioning keyboard from the touchpad end and flip it over. Afterwards, insert the new keyboard by placing the board face-down and lining it up so when you flip back the computer over, the keys are at the right position. Attach the keyboard to the ribbon by pushing down the connector tabs, insert the new keyboard in, and replace the bezel. You can leave on the comments section any queries, suggestions, and (of course) comments you might have about this article.


About the Author

Comments are closed.

Back to Top ↑